How to choose a pvc curtain hanger $ clip for 200mm and 300mm strips

Match the strip width first

The product range includes hanger and clip sizes for 100mm, 150mm, 200mm, 300mm, and 400mm PVC strips. The product name identifies the 200mm and 300mm versions, so these are the relevant choices when the curtain uses either of those strip widths.

Choose the 200mm version for a curtain made with 200mm strips. Choose the 300mm version for 300mm strips. The clip should run across the strip width so the PVC is held consistently along the top edge. Measure an existing strip across its flat width before preparing the order, especially when replacing hardware on an installed curtain.

Confirm the PVC thickness

This hanger and clip is intended for PVC strip curtain material from 1.0 to 1.5 mm thick. That range is the key fit check for the strip itself. A buyer replacing clips should measure the PVC with the strip lying flat and identify whether the existing installation uses 1.0 mm or 1.5 mm material.

The product is a fixture for PVC strip curtains, so it suits warehouse doorways, partition openings, and other areas where a PVC strip curtain is installed across an access opening. Picture the installation at a doorway: the 200mm or 300mm clip must match the strip width, and the strip thickness must remain within the 1.0 to 1.5 mm range.

Select the stainless steel and mounting style

The hardware uses stainless steel 201 or 304 and is available in CN style and EU style. Include the required metal grade and mounting style in the purchase request rather than treating them as interchangeable options.

Stainless steel 201 or 304 suits buyers who need stainless steel curtain accessories for a PVC strip curtain installation. The CN style or EU style suits a replacement project where the new clips need to correspond with the existing mounting arrangement. Send a photograph of the current hanger, its measurements, and the curtain strip width when asking for a replacement quotation.

Which version fits your order?

• 200mm hanger and clip: Choose this version for 200mm-wide PVC strips and material thickness from 1.0 to 1.5 mm.
• 300mm hanger and clip: Choose this version for 300mm-wide PVC strips and material thickness from 1.0 to 1.5 mm.

Both choices belong to the same PVC strip curtain hardware range. The deciding checks are the strip width, PVC thickness, stainless steel grade, and CN or EU mounting style. Review those four details against the existing doorway before placing an order.